Instructions for the ACC device installation

Important: When installing the device, carefully follow the instructions. If inadequate methods or setting points are used, the device may fall or not be registered when passing through a fixed place.


1. POSITION (passenger cars)
From the inside of the windscreen, at least 5 cm from the top of the windshield and behind the mirror so that it is outside the driver’s eye view.

Before installing the bracket for the device, use a handkerchief to place the intended place for installation. The use of any other means or handkerchiefs other than intended may result in poor adhesion to the surface and the device may fall off.

On the prepared and cleaned windscreen pad, patch the device holder and then fit the appliance itself. Avoid contact with the adhesive part of the carrier so as not to impair the quality of the adhesive.